About Our Equipment

  • HOME
  • About Our Equipment

The right tools for any job.

JMS will help choose the correct device for
your project to deliver your data within
tolerance, under budget and ahead of schedule.

Recommended by

Every project is unique. To scan anything from small jet engine components to large outdoor arenas on a short notice, you need a full array of hardware and software. That is why JMS has a world-class selection of metrology devices - and a record of success serving diverse industries.


Comparison of Devices

Device Lineup

Features of the FARO Edge

  1. 7-axis arm reduces blind spots during scanning.
  2. Quick inspections with the ball or point probe.
  3. Accuracy: ±0.041 mm
    Max. dist. between two points: 2.7m
  • High precisionHigh precision

Optimized for scanning and measuring targets in an area of 300mm to 3,000mm in diameter.

Features of the FARO Quantum

Features of the FARO Quantum

  1. Non-contact scanning with the LLP.
  2. Scan rate: 560,000 points/sec.
  3. Accuracy: ±0.025 mm
  • Reverse engineeringReverse engineering

Reverse engineering from point cloud to CAD is possible with the LLP.

FARO Quantum
(external link)
Features of the FARO Vantage

Features of the FARO Vantage

  • Dynamic laser tracking.
  • Range: ⌀160m
Range 2m
(6.6ft)		 5m
(16.4ft)		 10m
(32.8ft)		 20m
(65.6ft)		 30m
(98.4ft)		 40m
(131.2ft)		 60m
(196.9ft)		 80m
(262.5ft)
MPE 0.044
mm
(0.0017")		 0.064
mm
(0.0025")		 0.099
mm
(0.0039")		 0.170
mm
(0.0067")		 0.240
mm
(0.0095")		 0.311
mm
(0.0122")		 0.453
mm
(0.0178")		 0.594
mm
(0.0234")
  • High-accuracy measurementPrecision
  • Tracking measurementTracking measurement

The Vantage is the best choice for measuring moving targets in a field of 3m to 160m in diameter.

FARO Vantage
(external link)

Dynamic Laser Tracking

Do you need to move or set up a new production line? Dynamic laser tracking is the ideal approach for taking measurements of moving targets. JMS is here to provide solutions.

Contact us about dynamic laser tracking.

Features of the Leica AT402

  • Range: ⌀320m
Range 2m 5m 10m 20m 30m 35m 40m 60m 80m
MPE 0.036
mm		 0.063
mm		 0.106
mm		 0.191
mm		 0.276
mm		 0.318
mm		 0.361
mm		 0.530
mm		 0.700
mm
  • Long-range measurementLong-range measurement

The AT402 is the best choice for taking precise measurements at up to 160m in any direction.

Features of the Leica Absolute Tracker AT960MR

Features of the Leica AT960

  • Dynamic laser tracking.
  • Range: ⌀40m
  • High resolution laser scanning with the LAS.
  • Precise measurements of blind spots using the T-probe.
Range
(dadius)		 2m 5m 10m 20m
MPE 0.036
mm		 0.063
mm		 0.106
mm		 0.191
mm
  • Tracking measurementTracking measurement
  • Reverse engineeringReverse engineering

While measurements can be taken from targets at a distance of up to 40m, the AT960 is best for ultra-precise measurements and 3D scans of targets 1.5 to 5m away from the device.

AT960
(external link) 　 LAS
(external link) 　 T-Probe
(external link)
Leica absolute tracker AT960MRの特徴

Features of the FARO Focus 3D

  • Various resolution and color settings.
  • MIN-res B&W, 60sec/scan
    MAX-res full-color, 2hrs/scan
  • Can acquire point cloud data only or and point cloud + image aggregate data.
  • Captures point data in a ⌀240m dome-shaped area.
  • Ideal for BIM or documenting/reverse engineering large, complex objects.
  • Accuracy: ±2mm at 25m
  • Simultaneous image acquisitionSimultaneous image acquisition
  • Measurement in short timeMeasurement in short time
  • Long-range measurementPoint cloud + image data
  • Reverse engineeringRapid spatial scanning of large areas

Ideal for scanning entire areas such as factory layouts, tunnels, or large outdoor structures.
Substantially reduces the measurement time compared to conventional models.

Focus 3D
(external link)

Leica absolute tracker AT960MRの特徴

With Focus 3D you can rapidly create realistic 3D scans of entire locations.

Past targets scanned with the Focus 3D include power plants, muesums,
excavation sites, utility towers, bridges, railroad tracks and more.
*We offer long-term rental of devices. Contact us for details.

It is possible to acquire images and data without getting closer to the measurement object,leading to significant improvement of safety and work efficiency!
Introduction of the Yamawaki plant measurement booth

Yamawaki Plant
Metrology Workshop

Our metrology workshop is located at the Yamawaki Plant of Nabeya Mfg in Kakamigahara City. Our workshop includes a large 4-section slotted surface, ready for test installations of jigs and other factory equipment.

Slotted surface plate dimensions

・Total area (4 surfaces): 23,000mm × 15,000mm × 6,900mm

・Ceiling crane capacity: 7,500kg

受け入れ可能サイズ

Area per surface: 4,500mm × 6,000mm × 6,500mm

Our Equipment At-a-Glance

Example Use Cases Hardware Software
Heavy equipment, jigs, industrial robots, steelworks, rocket production lines, nuclear reactors, wind tunnels, etc. FARO Vantage (1x)
Leica laser trackers (4x)		 SpatialAnalyzer
CAM2
PolyWorks
CATIA 4/5
SolidWorks
Aircraft parts, automobile production lines, stamping press dies, medical devices, LCD/semiconductor inspection tools FARO arm (3x)
Hexagon arm (3x)
Historical artifacts, woodblock printing plates, bronze sculptures, injection molds, prototypes FARO arm with LLP (1x)
Hexagon LAS (1x)		 Geomagic Control
Geomagic Design
PolyWorks
CATIA 4/5
SolidWorks
Aircraft fuselages, CBU automobiles, tunnels, roads, utility towers FARO Focus 3D (1x) Scene
Galaxy-Eye
Aircraft components, tools Mitutoyo Crysta Apex (1x) MCOSMOS
Leave it to us

Contact JMS

Thank you for choosing JMS!

Please describe your project specifications in the form below and we will get back to you in 2-3 business days.

Name
Company
Department
Title
Postal code
Address
mail
mail
(confirmation)
Details
Attached file
(Up to 5 MB)
Select file